Product outline

Torque, rotation speed and power are displayed
■ Torque monitor specialized for UTMⅡ/UTMV.
■ Torque, rotation speed and power are displayed simultaneously.
■ Hold function (Sample, Peak, Bottom, P-P, Average)
■ Upper/lower comparators function (ALM HI, HI, OK, LO, ALM LO)
■ Data storage function
■ Easy connection to UTMⅡ/UTMV with one cable.
■ The unit supplies electric power to UTMⅡ/UTMV.
■ Variation of torque, rpm, and power can be monitored and saved on PC. (with USB interface option only)

Specifications

Torque sensor input(voltage input)
Input resistance 1 MΩ or more
Signal input range ±5 V
Accuracy Non-linearity : Within 0.02%/FS±1 digit
Zero drift : Within 0.2 mV/℃ RTI
Gain drift : Within 0.01%/℃
A/D converter ・ Speed : 300 times/sec.
・ Resolution : 24 bit (binary)
Effective Resolution : 1/30000 with respect to 5 V
Analog filter Low-pass filter (-6 dB/oct.)
Selectable from 3 Hz, 30 Hz, 300 Hz, and 1 kHz.
Analog monitor output Input voltage return (for tester)
 
Drive power supply for UTMⅡ/UTMV
Power supply voltag DC 24 V *One UTMⅡ/UTMV at the maximum
 
Pulse input for rotation speed (open collector input)
Maximum input frequency In accordance with the output frequency of the UTMⅡ/UTMV series
Minimum input frequency Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr)
Select from 60, 40, 20, 12, or 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width 50 μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic = Approx. 10 mA)
 
Display section
Display Main display : Character height 15 mm Numerical display by 7-segment green LED (5-digit+sign)
Sub display : Character height 8 mm Numerical display by 7-segment green LED (5-digit)
Indicated value Main display : 5-digit -99999 to +99999 Signs : Minus sign on most significant digit
Sub display : 5-digit -19999 to +99999 Signs : Minus sign on most significant digit
(No minus sign for rotational speed)
Decimal point 0, 0.0, 0.00, 0.000 (Only a torque and a power. Rotation speed is nothing)
Display frequency Selectable from 3, 6, 13, and 25 times/sec.
Status display HI / LO / HOLD
 
Setting section
Setting item HI/LO limit :
HI limit / LO limit / Alarm HI limit / Alarm LO limit

Comparison/hold :
Comparison function select / Near zero / Hysteresis / Hold function select / Detection time / Average sample number / Hold start level

Operation 1 :
Motion detect (time) / Motion detect (range) / Zero tracking (time) / Zero tracking (range) / SI/F function select / Display frequency / Display ON/OFF

Operation 2 :
Digital filter (torque) / Analog filter (torque) / Dead band / Digital filter (rotation speed)

Calibration :
Calibration function select 1 (torque) / Zero calibration / Equivalent input calibration / Actual load calibration / Digital offset / Digital Zero limit / Calibration function select 2 (rotation speed/power)

Protect/Initializ :
Setting protect / Key protect / Initialize / Password / Record data clear

Hold Sample, Peak, Bottom, P-P, Average
Hold section setting (All section・External signal・External signal+Time・Level+Time)
 
External I/O section
External input
(4)
Hold control / Hold reset / Digital Zero / Record data clear
Dry contact input circuit (minus common type), Ic = 10 mA or less
External output
(12)
Torque HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) / Rotation speed HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) /
Hold complete / RUN
Open collector output circuit (sink type), Vceo = 30 V (max) Ic = 30 mA (max)
Interface SIF : 2-wire serial interface
BCO : BCD parallel data output interface (Option)
232 : RS-232C communication interface (Option)
D3V : D/A converter voltage output(3 ch) (Option)
DAV : D/A converter voltage output (Option)
DAI : D/A converter current output (Option)
USB : USB interface (Option)
* Only one option can be installed.
 
General specifications
Power supply voltage AC 100 V to 240 V(+10%-15%)(free power source) 50/60 Hz
Power consumption 7 W typ.
Operating conditions Operation : -10 to +40℃ Storage : -40 to +80℃
Humidity : 85% RH or less(non-condensing)
Dimensions 96(W) × 96(H) × 138(D) mm (Not including projections)
Panel cutout size 92 × 92(+1-0) mm
Weight Approx. 1.0 kg
 
Attachments
Operation manual 1
Cable for UTMⅡ/UTMV connection 2 m 1
External input/output connector 1
Unit seal 1
AC input cord 3 m (with solderless terminal)* 1
Connector for BCD output (with BCD output option) 1
Operating tool (with D/A converter(3 ch) option) 1
Mini screwdriver (with D/A converter option) 1

*The attached AC input cord is intended for 100 V AC power in Japan.

 

Option (Only one option can be installed.)

Model Description
BCO BCD parallel data output interface
232 RS-232C communication interface
D3V D/A converter voltage output(3 ch)
DAV D/A converter voltage output
DAI D/A converter current output
USB USB interface
 

Optional accessories

Model Description
CA372-I/O Cable with FCN connector at one-end 3 m
CA81-USB miniUSB-computer USB cable 1.8 m
CAAC2P-B3 AC Supply cord 3 m
CAAC3P-CEE7/7-B2 AC Supply cord (Voltage resistance:250 V)2 m
CATM21-M Cable for UTMⅡ/UTMV connection 2 m
CATM51-M Cable for UTMⅡ/UTMV connection 5 m
CN34 D-Sub9p connector for RS-232C
CN50 FCN series I/O connector (with cover)
CN51 BCD output connector
CN55 FCN series I/O connector (with diagonal cover)
CN73 D/A converter(3 ch) connector
CN90 Waterproof plastic connector for UTMⅡ/UTMV connection
DTC2-PSL Case for TM301
GMP96x96 Rubber packing



Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.



Structure of product code

TM301_product-code

Download

Product catalogue(PDF)
⇒Download Page
Operation manual(PDF)
External dimension
DXF
(ZIP)
PDF
Support tools
Software