Slider

Product outline Specifications Download

Product outline

FC400-DAC-FA is a compact type indicator equipped with D/Aconverter & USB as standard features.
Suitable for force measurement in switches product testing and tablet press machine Multi-channel system built up in a network can be done easily.
It has displayable graph in the pc software, and setup can be done easily.

 

High sampling rate & resolution

High-Speed A/D conversion and powerful digital processing capability of 2400 times/sec.. High display resolution of 1/100000 (max).

Measurement can be performed quickly and precisely due to high speed A/D conversion.

Application software for USB interface

With communication through USB interface, logging, graph, display, setting parameters, and calibration can be done.

Compact size

it can be fit into a limited space!
Lightvweing & compact body for 35mm DIN rail mount.


Various interface

Equivalent input calibration

Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.

Digital peak & Bottom hold. Upper and lower limit comparison

OK / NOK judgement in fast process can be made.

Input conversion value display

The output signal level of load cell can be displayed in mV/V for monitor purpose.

6 digit display

24 bit A/D convertor enables 6 digit display.

Specifications

Analog section
Excitation voltage DC 5 V±5% Output current: 90 mA
DC 2.5 V±5% Output current: 45 mA(depending on settings)
Ratiometric method (Up to 6 350 Ω load cells can be connected in parallel)
Signal input range -3.9 to +3.9 mV/V
Zero adjustment range Automatic adjustment by digital processing -3.0 to 3.0 mV/V
Span adjustment range Automatic adjustment by digital processing 0.01 to 3.8 mV/V
Min. input sensitivity 0.15 μV/count
Accuracy Non-linearity: within 0.01% FS
Zero drift: 0.0002% FS/℃ Typ.
Gain drift: 1 ppm/℃ Typ.
Filter Digital low-pass filter: 0.1 to 600 Hz
Moving average filter: OFF, 2 to 999 times
A/D converter Speed: 2400 times/sec.
Resolution: 24 bit (binary)
Display section
Display unit Character height 8 mm, Numerical display by 7-segment green LED
Display value Up to 6 digits
Display frequency Selectable from 1, 3, 6, 13, 25 times/sec.
Hold functions
Hold Sample, Peak, Bottom, Peak & Bottom, Average
External signal
Output signal (5) Transistor’s open collector output
Vceo = 30 V, Ic = 50 mA
Input signal (3) Selectable/configurable
Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.).
* DC 24 V external power supply is required.
Interface
USB USB interface
DAC D/A converter(Voltage and current output)
485 RS-485 interface (Selectable from Modbus-RTU or UNI-Format)
General performance
Power supply voltage DC 24 V (±15%)
Power consumption 3 W typ.
Operating conditions Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃
Humidity: 85%RH or less (non-condensing)
Dimensions 34(W) × 88(H) × 91(D) mm (Not including projections)
Weight Approx. 210 g
CE marking certification EMC Directives EN61326-1
Attachments
Quick manual 2
Jumper wire 2
Mini driver 1
Various I/O connector 3



Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.



Download

Product catalogue(PDF)
⇒Download Page
Operation manual(PDF)
External dimension
DXF
(ZIP)
PDF
Support tools
Software