Product outline

UTMⅡ/UTMV can be easily connected to TM400 with the supplied cable. With the built-in battery, it can be operated even without power source. Using with UTMⅡ with rotary encoder option, torque-angle (or displacement) relationship can be monitored. With the compact body and the high sampling speed, it is ideal for field use.

Features

■ Torque monitor for UTMⅡ/UTMV.
■ With the built-in battery, it can be operated even without power source.
■ Ideal for use with UTMⅡ (square shaft) series with the high-speed sampling at 20000 times/sec.
■ Easy connection to UTMⅡ/UTMV with one cable.
■ Operation power can be supplied to the UTMⅡ/UTMV (and also to an optional rotary encoder).
■ Torque & rotation speed and torque-angle curve can be monitored.
■ Data recording with memory function and USB.
■ Various display mode: real-time, graph, recorded data, etc….
■ Upper/lower limit & hold function.

Change the display mode by pressing the ESC button

External dimension



Specifications

Torque input (voltage input)
Signal input range -5 to +5 V Input impedance:1 MΩ or more
Accuracy Non-linearity : within 0.02% FS±1 digit
Zero drift : within 0.2 mV/℃ RTI
Gain drift : within 0.01%/℃
Analog filter Low pass filter (-6 dB/oct.) Select from 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz
A/D converter ・ Speed : 20000 times/sec
・ Resolution : 24 bit (binary) Approx. 1/30000 against 5 V
 
Input for rotation speed (open-collector pulse)
Maximum input frequency In accordance with the output frequency of the UTMⅡ/UTMV series
Minimum input frequency 15 rpm
Minimum detection pulse width 50 μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic = Approx. 10 mA)
 


Encoder input (open-collector pulse)
Maximum input frequency 50 kHz
 
Display section
Display unit 128×64 dots monochromatic LCD (display area: 57 x 28 mm)
Displayed data Torque, rotation speed, Angle (numeric)
Torque-time or torque-angle/displacement curve (graphic)
Status display (HI, LO, OK, and HOLD)
 
Interface
Interface USB
 
General specifications
Power supply Built-in secondary battery
Continuous use time: Approx. 5 hours(at room temperature)
AC adopter
Operating conditions Operation temperature : -10 to +40℃, storage temperature : -20 to +60℃
Humidity : 85% RH or below (non-condensing)
Dimensions 88(W) × 140(H) × 35(D) mm (Not including projections)
Weight Approx. 500 g
CE marking certification EMC directives EN61326-1
Safety standard EN62311
Please specify requirement for CE marking certified product when making your order.
 
Attachments
AC adopter 1
Operation manual 1
Cable for UTMⅡ/UTMV connection 2 m 1
Cable for UTMⅡ rotary encoder connection 2 m 1
 

Optional accessories

Model Description
CA81-USB miniUSB-computer USB cable 1.8 m
CATM21-M cable for connecting UTMⅡ/UTMV 2 m
CATM51-M cable for connecting UTMⅡ/UTMV 5 m
CATM(R)21 cable for UTMⅡwith rotary encoder connection (non-connector at one end) 2 m
CATM(R)21-M cable for connecting UTMⅡrotary encoder 2 m
CATM(R)51-M cable for connecting UTMⅡrotary encoder 5 m
CN90 Waterproof plastic connector for UTMⅡ/UTMV
CN91 Waterproof plastic connector for UTMⅡ rotary encoder
TM400 AC CABLE EU AC cable(For EU)
 



Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.



Download

Product catalogue(PDF)
⇒Download Page
Operation manual(PDF)
External dimension
DXF
(ZIP)
PDF
Support tools
Software