Loadcells

Tension/Compression load cell (Male screws on both ends)

ULCT

* Easy-to-install with double nuts due to the male screws on both ends and attached low-profile nuts

* Measure both tension & compression load

* The height is short as 70mm; this load cell does not block other equipment

Single point type loadcell

PW27AP

* Capacity 10 / 20kg

* Construction material: Stainless steel

* Completely waterproof, all stainless steel-made & hermatically sealed structure

* Hygienic load cell designed for food production

* Suitable for small weight measurement

Tension type loadcell

S40A

* Capacity 50kg / 100kg / 200kg / 500kg / 1t / 2t

* Constructed of stainless steel, Lightweight

Compact high-capacity compression type loadcell

USLC

* Capacity 50 kN

* Construction material: Stainless steel

* Can measure up to 50kN with diameter of 22mm!

* Accuracy 0.3%; astounding among those compact & high-capacity load cells

* Easy & fast replacement from competitors' loadcells

Ultra thin compression type load cell

UST

* Capacity 50N / 100N / 200 N / 500 N

* Construction material: Stainless steel

* The thinnest strain gauge type load cell in the world with a diameter of φ10mm and a height of 2.3mm

* As well as assembling to new machines, convenient for retrofitting to existing machines

* Suitable for load distribution measurement with multiple units

High stiffness and high response loadcell

SCB

* Capacity 100 N / 200 N / 500 N / 1 kN / 2 kN / 5 kN / 10 kN / 20 kN / 50 kN / 100 kN / 200 kN

* Phenomenal rigidity is achieved for a strain gauge type sensor!

* Safe overload of 500％

* Easy replacement

* High responsiveness

High accuracy tension / compression type loadcell

USB58

* Capacity 200 N / 500 N

* Accuracy 1/10000 (Non-linearity, Hysteresis, Repeatability)

* High input impedance: 1050Ω

* Usage: Applications in fields that require high accuracy such as calibration of testing units, in-house standard devices, etc.

Tension/compression type load cell

USM

* Capacity 1 N / 2 N / 5 N / 10 N / 20 N / 50 N

* Ultra-compact size: 11W×14H×4D mm

* Safe overload rating of 500% !!

* Suitable for measurement of thread tension and plunger force for needle and syringe.

Tension/compression type load cell

URM

* Capacity 50 N / 100 N / 200 N / 500 N

* Compact size: 15W×20H×7D mm

* Accuracy 3/10000 (Non-linearity, Hysteresis, Repeatability)

Compact compression type loadcell

UCW/UCW2

* Capacity 10N / 20N / 50N / 100N / 200 N / 500 N

* Construction material: Stainless steel

* Diameter of 6 mm and a height of 3.5 mm(UCW2)
Diameter of 7 mm and a height of 4.5 mm (UCW)

Compact compression type loadcell

UNCDW

* Capacity 200 N / 500 N

* Construction material: Stainless steel

* Ultra-compact compression type loadcell with a diameter of 7 mm and a height of 5 mm

Compact compression type loadcell

UNCSR

* Capacity 5 N / 10 N / 20 N / 50 N

* Construction material: Aluminum (5 N / 10 N), Stainless steel (20 N / 50 N)

* Ultra-compact compression type loadcell with a diameter of 12 mm and a height of 4 mm

* UNCSR-FG: W/ plate for screw fastening

Compact compression type loadcell

UNLRS

* Capacity 100 N / 200 N

* Construction material：stainless steel

* Compact compression type loadcell with a diameter of 20 mm and a height of 9.5 mm

* UNLRS-FG: W/ plate for screw fastening

Compact compression type load cell

ULS

* Capacity 2 kN / 5 kN

* Special steel with high hardness, wear resistance is greatly improved

* Suitable for high cycle applications!

* Special alloy steel

* Diameter 21mm, height 10mm compact compression type

* ULS-FG: With fastening plate

Compact compression type loadcell

UNLS

* Capacity 100 N / 200 N / 500 N / 1 kN / 2 kN / 5 kN

* Construction material: Stainless steel

* Compact compression type loadcell with a diameter of 21 mm and a height of 10 mm

* UNLS-FG: W/ plate for screw fastening

Compact high-capacity compression type loadcell

UCC / UCC(HL)

* Capacity 10 kN / 20 kN

* Construction material: Stainless steel

* Can measure up to 20kN with diameter of 21mm!

* Also supports high/low temperature environment from -40℃ to 150℃ (HL)

Compact high-capacity compression type loadcell

UNMR

* Capacity 10 kN / 20 kN

* Construction material: Stainless steel

* Compact compression type loadcell with a diameter of 21 mm and a height of 10 mm

Compact high-capacity compression type loadcell

USH

* Capacity 10kN / 20kN / 50kN

* Construction material: Stainless steel

*Compact size load cell with big capacity

Compression type loadcell

UNBF

* Capacity 300N / 500N / 1kN / 2kN / 3kN / 5kN / 10kN / 20kN / 30kN / 300kN / 500kN

* Stainless steel

* Compact and thin design allows easy mounting on existing equipment.

Compression type loadcell

UNBF2

* Capacity 30kN / 50kN / 100kN / 200kN / 300kN / 500kN

* Stainless steel

* Compact and thin design allows easy mounting on existing equipment.

Compression type loadcell

UNGS

* Capacity 1 kN / 2 kN / 5 kN / 10 kN / 20 kN

* Construction material: Stainless steel

* Compact size and low capacity allows for wide use.

Tension/compression & center-hole type load cell

UCPI

* Capacity: 1kN, 2kN, 5kN, 10kN, 20kN, 50kN

* A tapped hole cut in the center, can be used for both tension & compression measurement

* Suitable for assembling into press machine and compression & tension testing machine due to its low-profile body

* A cable with a connector. Convenient for exchange.

* Made of stainless steel

Center-hole type loadcell

UBFH

* Capacity 1kN / 2kN / 5kN / 10kN / 20kN

* Stainless steel

* Easy to use low profile center hole load cell

Center-hole type loadcell

UNTCH

* Capacity 5 kN / 10 kN / 20 kN / 50 kN / 100 kN

* Construction material: Special alloy steel

* Most appropriate for load control of press fitting, caulking, etc.

Tension/compression type load cell

UTTC

* Capacity 1 kN / 2 kN / 5 kN / 10 kN / 20 kN / 50 kN

* Tension / compression type load cell

* Less impact from lateral load pressing force can be measured accurately

Tension / compression type loadcell

UNCLB

* Capacity 500N / 1 kN / 2 kN / 5 kN

* Construction material : Stainless steel

* Compact and lightweight easy-to-use loadcell for both tension and compression applications

Tension/compression type load cell

UPP-100N

* Capacity 100N

* Safe overload rating of 500%

* Suitable for click tester and push tester

* A loadcell with the high sensitivity and rigidity both

3D force sensor

UPP-100NX3

* Force in 3 dimensions(X, Y, Z) can be measured at the same time

* Safe overload rating of 500%

* The three-axis force sensor with the high sensitivity and rigidity

DUAL-AXIS LOAD CELL

URT-20-5K

* Thrust force and Torque are measured simultaneously.

* Phenomenal safe overload!!

* URT-20-5K is a dual-axis load cell having 2kHz high-speed responsivity and high-rigidity.

Tension type loadcell

RSCC

* Capacity 50kg / 100kg / 200kg / 500kg / 1t / 2t / 5t

* Constructed of stainless steel, Lightweight

* Applications: Crane scales, tank scales, etc.

Laser welded closed structure

RTN

* Capacity 1t / 2.2t / 4.7t / 10t / 15t / 22t / 33t / 47t / 68t / 100t / 150t / 220t / 330t / 470t

* Construction material: Stainless steel

* Usage: Tank, truck scale, etc

Beam type loadcell

HLCB1

* Capacity 110kg / 220kg / 550kg / 1100kg / 1760kg / 2.2t / 4.4t /10t

* High accuracy, constructed of stainless steel, hermetically sealed

* Applications: Platform scales, tank scales, etc.

* IP68

Beam type loadcell

SB14

* Capacity 2.5 kN / 5 kN / 12 kN / 25 kN

* High accuracy, constructed of stainless steel, hermetically sealed

* High input impedance: 1100Ω

* Applications: Platform scales, hopper scales, etc. To detail

Beam type loadcell

Z6FC3/Z6FD1

* Capacity 5 kg / 10 kg / 20 kg / 50 kg / 100 kg / 200 kg / 500 kg / 1t

* High accuracy, constructed of stainless steel, hermetically sealed

* Stainless steel bellows that eliminate disturbance

* Applications: Hopper scales, conveyor scales, etc.

Single point type loadcell

PW4M

* Capacity 300g / 500g / 1kg / 2kg / 3kg

* Constructed of Aluminum, Lightweight

* Most appropriate for load control of bench scales, floor scales, conveyor scales, etc.

Single point type loadcell

PW6C

* Capacity 5 / 10 / 20 / 30 / 40kg

* Constructed of Aluminum, Lightweight

* Most appropriate for load control of bench scales, etc.

Single point type loadcell

PW10A

* Capacity 50 / 100 / 150 / 200 / 250 / 300kg

* Constructed of Aluminum, Lightweight

* Most appropriate for load control of bench scales, floor scales, conveyor scales, etc.

Single point type loadcell

PW15AH

* Capacity 10 / 20 / 50 / 100kg

* Constructed of stainless steel, Lightweight

* Most appropriate for load control of bench scales, floor scales, conveyor scales, etc.

Single point type loadcell

PW25P

* Capacity 10 / 20kg

* Construction material: Stainless steel

* Usage: Small weight measurement, etc