Graphic display/touch panel type all-in-one type weighing indicator
* Color liquid crystal, touch panel installation
* High-speed A/D conversion and powerful digital processing capability of 1000 times/sec.
* Direct connection to PLC
* Code memory for 100 types of formula batch weighing
* Convenient function of sequential weighing for auto weighing scales
* Weight value waveform display and working points of full flow, dribble flow, etc., can be monitored
Weighing indicator for check weigher
* F805AT series equipment developed for applications use only
* Weighing indicator developed for checker scale
* Weighing system ideal for your application can be constructed easily. “Dynamic mode” is most appropriate when belt speed or dimensions of weighed items are not consistent. “Static mode” is most appropriate when there is dispersion in weight data of weighed items.
Weighing indicator for fomula weighing system
* F805AT series equipment developed for applications use only
* Weighing indicator developed for formula batch weighing
* Up to 200 types of formula and 100 types of raw materials can be pre-registered and automatic weighing can be performed by switching over from feeding and discharging
Weighing indicator for constant Weight feeder
* F805AT series equipment developed for applications use only
* Weighing controller developed for weight supply / loss-in-weight
* Automatic control of weight supply (discharge) and replenishment (charge) can be performed by calculating flow rate from discharged weight of material inside a hopper
Weighing indicator for belt scale
* F805AT series equipment developed for applications use only
* Weighing controller developed for belt scale
* Materials can be weighed while materials are transferred on belt conveyors
* Feed rate, total rate, weight density and load factor can be displayed and output. This is made possible by the weight signal sent by loadcell and the speed signal sent by speed detector, installed at the conveyor
* Transfer can be controlled by setting the target value
Weighing indicator for multi draft
* F805AT series equipment developed for applications use only
* Weighing controller developed for multi draft weighing
* Powerful when used in heavy weighing work with small weighing scales
* Each control function such as rough feeding auto switch over and judgment condition can be suitably combined for speedy and “low-count yet effective” weighing
All-in-one type weighing indicator
* High-speed A/D conversion and powerful digital processing capability of 100 times/sec.
* Code memory for 100 types of formula batch weighing
* Convenient function of sequential weighing for auto weighing scales
* Powerful filter that prevents influence of vibrations in mechanical systems
* Function of collecting statistics of weight values for each code
Functionally improved weighing indicator
* High-Speed A/D conversion and powerful digital processing capability of 500 times/sec
* Auto filter adjustment
* Digital low pass filter
* Recovery from temporary stop/power failure
* Set value restoration
* Quantitative discharge control function (discharge / feed weighing)
* Convenient function of sequential weighing for auto weighing scales
* Various optional interfaces available
Basic type weighing indicator
* High-speed A/D conversion and powerful digital processing capability of 100 times/sec.
* Quantitative discharge control function (discharge / feed weighing)
* Convenient function of sequential weighing for auto weighing scales
* Various optional interfaces available
Basic type with accumulation value display weighing controller
* High-speed A/D conversion and powerful digital processing capability of 200 times/sec.
* Accumulation value and various setting values are displayed on 18-digit display
* Convenient function of sequential weighing for auto weighing scales
* Standard built-in RS-232C. One option interface can be selected from CC-Link, BCD output, RS-485 or D/A converter
Graphic display/ touch panel type weighing indicator
* Color liquid crystal, touch panel installation
* Graphic display function that displays fluctuations of indicated weight to waveform display
* High-speed A/D conversion and powerful digital processing capability of 100 times/sec.
* Code memory for 8 types of formula batch weighing
* Various optional interfaces available
Weighing indicator for checker scale
* Weighing indicator designed for in-motion check weigher
* With high-performance filter to attenuate noise and vibration, stable and accurate weight measurement can be achieved
* All necessary functions for check weighers like over/under evaluation, ranking or sorting, various weighing modes, conveyor controls, statistics, and so on are packed into this model
Built-in type high speed sampling weighing indicator
* One option interface can be selected from CC-link or BCD output
* Convenient function of sequential weighing for auto weighing scales
* High-speed A/D conversion and powerful digital processing capability of 1000 times/sec.
* High display resolution of 1/10000 for all input range (Internal resolution 1/40000)
* Super low drift of 0.1 μV/°C (Typ.0.08 μV/°C)
Built-in type weighing indicator for CC-Link
* Directly connectable to CC-Link
* Convenient function of sequential weighing for auto weighing scales
* High-speed A/D conversion and powerful digital processing capability of 500 times/sec.
* Compact body ideal for use on control panel
* High display resolution of 1/10000 for all input range (Internal resolution 1/40000)
