UNIPULSE
Member registration| Login   me-i.png 日本語 | 中文(簡) | 中文(繁) | ไทย | Tiếng việt  
  • Home
  • Product Information
  • Contact Us
  • Corporate Information

  • 日本語    中文(簡)    中文(繁)    ไทย    Tiếng việt   
  1. UNIPULSE TOP
  2. Product Information
  3. Force measurement

Force measurement

Our digital indicators are used with load cells to monitor force applied in assembly operations like press-fitting and riveting for automated quality check (OK/not OK evaluation) of products.

PRESS FORCE ANALYZER

PFA

* “Process monitoring” and “Control” for Servo Press Machines

* ”Digital Indicator” and “Motion controller” are 2 in 1!

* Available for ”7.0 inch”.

read more

Digital indicator with SD card slot & high sampling rate 

FS2000

FS2000

* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)

* Multi-point judgment (OK/NOK judgment can be performed on multi points in one process. Max. 5 points)

* Easy parameter setting allowed by direct touch on touch panel

* Save measurement data and setting values in an SD card

* 25000 times/sec. high-speed digital processing

read more

DIN-rail mount force indicator with CC-Link interface

FC400-CCL-FA

* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.

* Digital low-pass filter is available!

* Digital peak hold, Hi & Lo judgement

* Lightweight and compact body to fit into limited space in a control panel

* DIN-rail mountable!

* USB interface for PC connection

read more

DIN-rail mount force indicator with D/A converter

FC400-DAC-FA

* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.

* Digital low-pass filter is available!

* Digital peak hold, Hi & Lo judgement

* Lightweight and compact body to fit into limited space in a control panel

* DIN-rail mountable!

* USB interface for PC connection

read more

DIN-rail mount force indicator with EtherNet/IP interface

FC400-EIP-FA

* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.

* Digital low-pass filter is available!

* Digital peak hold, Hi & Lo judgement

* Lightweight and compact body to fit into limited space in a control panel

* DIN-rail mountable!

* USB interface for PC connection

read more

DIN-rail mount force indicator with EtherCAT interface

FC400-ECT-FA

fc400ect200x200

* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.

* Digital low-pass filter is available!

* Digital peak hold, Hi & Lo judgement

* Lightweight and compact body to fit into limited space in a control panel

* DIN-rail mountable!

* USB interface for PC connection

read more

SD card available graphic display/ touch panel type digital indicator

F381A

F381A

* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)

* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)

* Standard equipped with displacement input (A 2-dimensional waveform comparison is possible by using both force and displacement inputs)

* Save measurement data and setting values in an SD card

* Easy parameter setting allowed by direct touch on touch panel

* 4000 times/sec. high-speed digital processing

read more

Digital indicator for voltage/ current output

F388A

F388A

* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)

* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)

* Save measurement data and setting values in an SD card

* Easy parameter setting allowed by direct touch on touch panel

* 4000 times/sec. high-speed digital processing

read more

Graphic display/ touch panel type digital indicator

F372A

* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform

* Extensive Hold functions that enable holding an accurate point and OK/NG judgment function

* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included

* Easy and simple setting operation by directly touching touch panel

* Compact square DIN 96 size

* High-speed digital processing capability of 2000 times/sec.

read more

Graphic display/ touch panel type digital indicator for voltage and current output

F377A

* Directly connectable to Voltage±10V, Current±20mA

* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform

* Extensive hold functions that enable holding an accurate point and OK/NG judgment function

* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included

* Compact square DIN 96 size

* High-speed digital processing capability of 2000 times/sec.

read more

Compact DIN 96 x 48 mm Size Digital Indicator

F331

* Convenient DIN 96 x 48 mm size that can be easily mounted on control panel

* Standard built-in USB interface

* Special PC application software

* High-speed digital processing capability of 300 times/sec

* Equivalent input calibration function

read more

2 channel input type DIN96□ size digital indicator

F350

* Calculation and judgment outputs are available for 2ch input values of strain gauge type sensors

* Calculation functions (ch1+ch2, ch1-ch2, |ch1-ch2|, High select, Low select)

* 9 points of judgment outputs are equipped

* Sampling speed as high as 3000 times/sec. on each channel

* Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor

* Analog monitor output

read more

Digital indicator with fast peak hold function

F325

* Fast analogue peak hold

* Digital peak/sample hold

* High-speed digital circuit with processing capability of 3000 times/sec.

* You could chose either RS-485 ( Modbus-RTU /UNI-format) or SI/F(Unipulse original serial interface) as a standard interface

* The high-performance filtering functions by using both analogue and digital technology

* Free software for parameter setting is available

read more

Compact square DIN 96 type digital indicator

F340A

* Analog peak hold function providing high-speed peak hold

* Digital zero function for one-touch zeroing of indicated value

* Compact square DIN 96 size

* High-speed HI/LO limit comparison function

* Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor

read more

Digital indicator for OMRON SYSMAC CJ1/CJ2/NJ

F130

* Direct connection to OMROM SYSMAC CJ1/CJ2/NJ network system

* High-speed sampling of 3000 times/sec.

* Completely seamless communication between CJ1/CJ2/NJ and F130

* System development time is reduced and maintenance management modifications and servicing are easy

* With greatly simplified inter-equipment wiring, cost advantages can be expected

read more

Portable digital indicator

F490A

* Lightweight design of 290g for portable use

* Measurement data is recorded in CSV format in its internal memory

* Recorded data can be referred to and copied via USB interface

* Various display modes such as graphic display and recorded data display prepared

* Multi-calibration function that allows six calibration values to be stored and read

* 4 types of Hold functions can set the data observation range

read more

Compact load cell USB converter

FS10

* You can monitor the load cell outputs on PC easily

* 1200 times/sec. high-speed digital processing

* Pass/fail test (HH・HI・LO・LL)

* Easy to perform the initial setup and calibration

* Up to 10000 measurement and status data can be recorded

* The module is powered by USB, and it can supply excitation voltage to the connected load cell as well

read more

  • Torque meter
    • Shaft type
    • Flange type
    • Coupling
    • Torque monitor
  • Loadcells
    • High Accuracy Type
    • Compact Compression Type
    • Compression Type
    • Press Fitting Type
    • Tension / Compression Type
    • Tension Type
    • Beam Type
    • Single Point Type
    • Multi Axis Force Sensor
  • Displacement measurement
    • Electrostatic capacitive
    • FIBER OPTICS
    • Digital Contact Sensor
  • Weighing measurement
    • Standard Type
    • Control Function Type
    • Loadcell Interface for PLC
    • Application Series for checker scale, formula batch, constant feed weigher, belt scale, multi draft
    • Application Series for truck scale
    • For Measurement Act
  • Force measurement
    • NUMERICAL DISPLAY TYPE
    • Waveform Display Type
    • PORTABLE TYPE
    • Loadcell Interface for PLC
  • Amplifiers
    • DC Amplifiers (For Various Tests)
    • Loadcell Converters (For Weighing)
  • Peripherals
    • Printers
    • External Displays
    • Junction box
  • Others
  • Obsolete Products
  • HOME
  • Product Information
  • Corporate Information
  • Site Map
  • Privacy Policy
  • Terms of Use
  • Contact Us

Copyright (C) 2023 UNIPULSE CORPORATION All Rights Reserved.

To the top